Our Products
The CHUTE MASTER Hydraulic
For Snowblower Chute Rotation
Upgrade your snowblower chute rotation with JD Tractor Upgrades for a superior performance. Our version, the CHUTE MASTER, features a Housing Cover that completely encloses the mechanism and comes with Stainless Steel fasteners for all components. We attach our Components directly to the Steel Chassis. We do not use an Intermediate Base Plate to mount parts like other designs do. Take your snow throwing experience to the next level with JD Tractor Upgrades today.
The CHUTE MASTER Electric 12v
For Snowblower Chute Rotation
We are introducing our brand new Chute Master 12V Electric Chute Rotation System.
This is specifically designed for 44” and 47” John Deere Hand Cranked Snow Blowers.
Unlike our original Chute Master Hydraulically controlled system, we did not want to leave out the Tractor Owners who are looking for an easy to operate system for their Hand Cranked Snowblowers.
Instead of dealing with a flimsy, poorly designed, Hand Crank System, this System needs just the push of a Toggle Switch to rotate your Chute with ease.
I can remember when I had my John Deere X530, barely having room in my Weather Enclosure to rotate the Crank Handle. So awkward.
This is also a much less expensive System than the Hydraulic System. It only needs the standard 12 Volts from your existing Battery to run the 12 Volt 50 RPM Gear Motor.
We tried a 100 RPM Motor but we decided to go with 50 RPM so it is less likely to catch you off guard and too quickly exceed the limit of the range of motion you need in the ordinary use of your Snowblower.
Tooth Replacement Set for DR Pro 60 Power Grader
Carbide Tipped Teeth for Grading
Above you can see 7 new replacement teeth and a single original tooth still okay to use.
The DR Pro 60 Power Grader has 14 Carbide Tipped Teeth for Grading. DR will only sell a complete replacement Tooth Bar containing the 14 Teeth for $530.00.
Our replacement Teeth have squared off Carbide Tips. When you buy all 14 for $224 you will be saving $306.00 not including Shipping Charges.
If DR Sales Reps hung up on you too when you asked to purchase just the Teeth then this is your other option.
We designed these to be mounted and bolted on top of your existing Teeth but some careful drilling and tapping needs to be performed.
We have found a 1/4-20 tap is only good for about 4 holes before the tap wears down and becomes prone to breaking.
You can also just weld these on top of your existing teeth but eventual replacement will be time consuming.
Above you can see 7 new replacement teeth and a single original tooth still okay to use.
